Customization: | Available |
---|---|
Type: | Seed Cleaning Machine |
Application: | Seed Gravity Table Separator |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
5XZ Gravity Separator for Bad Grain Seed Removing
1) Function: fine cleaning, sorting, separating to remove bad, immature, insect damaged, moldy and germinated seeds, impurities, and admixtures such as same-size stones but with different specific weight.
2) Application: granular grains and seeds.
3) Capacity: 3t/h, 5t/h, 10t/h, 15~20t/h (wheat).Gravity Separator, also known as gravity separation table, specific gravity separator, or density separator, is key processing machines for the perfect separation of products which are already treated by air screen cleaner and indented cylinder.5XZ series gravity separator is widely used to remove impurities, admixture, insect damage and immature kernels from cereal grains such as wheat, barley, oilseed rape, peas, beans, cocoa beans, hazelnuts, linseed.
Special features:
1) Modular screen deck, easy for replacement.
2) Larger motors for heavy seed.
3) Self-lubrication system can be added.
4) Stainless steel available for edible products.
Structural features:
1) Heavy duty and robust steel structural frame to absorb the vibrations.
2) Fans are installed on the same shaft with individual adjustable controller for each fan for precise control of air flow and easy maintenance.
3) Cellular vertical air distribution device mounted under the deck make the air lifting evenly.
4) Square woven mesh screen made of steel wire with no bottom fabric ensures air passing through no dead band.
5) Variable feed speed, deck inclination, vibration speed and air volume by individual control units.
6) Safe guards to all moving parts ensure the safe operation.
7) Environmentally friendly with screen dedusting cover, low noise.
Seeds and grains can be separated and graded by the suspension and friction characteristics.
Seeds flow over the inclined vibrating screen covered rectangular deck, in which pressurized air is forced through causing the material to be suspended and stratify according to its specific weight. The heavy particles float uphill while the light particles travel downhill.Rectangular deck makes the particles travel a longer distance, ensuring the cleaner separation of light and heavy particles and the lowest percentage of middlings, improving the quality of the end product.
1.Working Table
The most important part of the Gravity Separator is the sieve deck because it is the main separating surface. It consists of a carefully constructed wooden frame to counteract vibration problems with a steeless screen or cloth overcover which is the surface on which the separation takes place.2.Finger Plate
On the open end of the deck are mounted two cutting fingers which are adjustable to channel different fractions of the finished product according to their value. On the heavy side of the deck towards the feed end is the rock trap which is used to bleed a heavy trash product from the machine to avoid contamination of good heavy product3.Adjustable hadle and panel for air blower
Air regulation is one of the most important adjustments to
be made on a gravity separator. The most common mistake in air regulation is the use of too much air. Separation is not made by "blowing" the light material from the heavy but by using a controlled air flow to create the stratified layers which are then separated by the vibrating action of the deck.4.Material Outlet
It is consisted of three outlet, which is heavy Discharge, Middle discharge and Light discharge to have a good effect.
MODEL
|
5XZ-3
|
5XZ-5
|
5XZ-10
|
5XZ-15/20
|
Capacity
(T/H)
|
3
|
5
|
10
|
15-20
|
Dimension(L*W**H)mm
|
2750*1550*2050
|
3840*2110*2040
|
4300*2300*2050
|
5100*2300*2700
|
Weight(kg)
|
1000
|
1400
|
1800
|
3500
|
Power(kW)
|
10.35
|
17.57
|
17.57
|
30.3
|
Sorting Area(m2)
|
1.64
|
3.4
|
5.36
|
8
|
Selection Rate(%)
|
≥98.5%
|
≥98.5%
|
≥98.5%
|
≥98.5%
|
Impurity Removal Rate (Light)
|
≥99%
|
≥99%
|
≥99%
|
≥99%
|
Impurity Removal Rate (Heavy)
|
≥95%
|
≥95%
|
≥95%
|
≥95%
|
Our company was founded in 1976 and our main business includes grain cleaning equipment, wheat, corn, and soybean milling equipment, and seed cleaning and selection equipment. Our company currently has nearly a thousand experienced employees, a production workshop of 120000 square meters, and multiple advanced raw material machining equipment such as laser cutting machines, CNC cutting and bending machines, and fully automatic machining centers; In addition, the company has self operated import and export rights and has passed international authoritative organization certifications such as ISO9001 certification, SGS certification, and EU CE certification.We have served various types of customers in over 40 countries and regions around the world, and have received high praise from our users!